VEMER VP888200

VEMER Logik Micro DW Digital Timer Switch VP888200 User Manual

Модель: VP888200

1. Введение

The VEMER Logik Micro DW VP888200 is a compact digital daily and weekly timer switch designed for precise management of electrical loads. This device features a modular 1 DIN unit design, an LCD display, and supports up to 20 ON/OFF or impulse programs with a 1-minute resolution. It is ideal for automating various electrical circuits in residential or commercial settings.

2. Информация по технике безопасности

Внимательно ознакомьтесь с данными инструкциями по технике безопасности перед установкой и эксплуатацией. Несоблюдение этих инструкций может привести к поражению электрическим током, возгоранию или повреждению устройства.

  • Электрическая инсталяция: Установка должна выполняться квалифицированным электриком в соответствии со всеми местными и национальными электротехническими нормами.
  • Отключение питания: Always disconnect power to the circuit at the main breaker before installing, servicing, or removing the device.
  • Томtage: Обеспечьте объем поставкиtage matches the device's specifications (230V AC, 50/60Hz).
  • Грузоподъемность: Do not exceed the maximum load capacity of the relay (16A at 250V AC, cos(Φ)=1).
  • Среда: Do not expose the device to moisture, extreme temperatures, or corrosive environments. The operating temperature range is -10°C to +50°C.
  • Защита: The device has an IP40 protection rating, meaning it is protected against solid objects larger than 1mm but not against liquids.

3. Продукт закончилсяview

The VEMER Logik Micro DW is a compact digital timer switch designed for DIN rail mounting. It features a clear LCD display for programming and status indication.

3.1. Physical Dimensions and Wiring Diagram

The following image illustrates the front and side dimensions of the Logik Micro DW, along with its electrical wiring diagram.

VEMER Logik Micro DW VP888200 Front, Side View и схема электропроводки

Описание изображения: This image displays three views of the VEMER Logik Micro DW VP888200. On the left, the "Vista frontale" (Front view) shows the device's height as 88mm and width as 18mm. In the center, the "Vista laterale" (Side view) indicates a depth of 60mm and a DIN rail clip height of 45mm. On the right, the "Schema" (Wiring Diagram) illustrates the electrical connections: L (Line) and N (Neutral) inputs, and the relay contacts labeled 1, 2, 3, 4, 5, 6. The diagram shows the internal relay switching between contacts for load control.

  • Передний View: Height 88mm, Width 18mm.
  • Сторона View: Depth 60mm, DIN rail clip height 45mm.
  • Схема электропроводки:
    • L (линия) и N (нейтраль): Вход питания.
    • Контакты реле: The device features a single changeover relay (1 NO/NC contact). Connect the load according to the desired switching configuration.

4. Настройка

4.1. Установка

  1. Отключение питания: Ensure the main power supply to the electrical panel is disconnected before beginning installation.
  2. Монтаж: Mount the Logik Micro DW onto a standard 35mm DIN rail. The device occupies 1 DIN module.
  3. Проводка: Refer to the wiring diagram in Section 3.1.
    • Connect the Line (L) and Neutral (N) power supply wires to the designated terminals.
    • Connect the electrical load to the relay output terminals. The device has one changeover contact.
  4. Безопасные соединения: Ensure all wire connections are secure and properly tightened.
  5. Восстановление мощности: После завершения и проверки установки восстановите подачу питания на электрощиток.

4.2. Initial Power-Up and Time Setting

При первом включении питания или после длительного отключения электроэнергии.tage, the display may show default settings or require time synchronization.

  1. Активация дисплея: The LCD display will activate. If it's blank, ensure power is supplied correctly.
  2. Установите текущее время и день: Use the device's buttons (refer to the specific button layout on the device, not detailed in provided data) to set the current time and day of the week. This is crucial for accurate program execution.

5. Инструкция по эксплуатации

The Logik Micro DW allows for daily and weekly programming of electrical loads.

5.1 Режимы программирования

  • Ежедневное программирование: Programs repeat every day at the same set time.
  • Еженедельное программирование: Programs can be set for specific days of the week or groups of days.

5.2. Настройка программ включения/выключения

The device supports up to 20 ON/OFF programs. Each program consists of an ON time and an OFF time.

  1. Войдите в режим программирования: Press the designated button (e.g., "PROG" or "SET") to enter the programming menu.
  2. Select Program Number: Choose an available program slot (e.g., P1, P2, ..., P20).
  3. Установить время включения: Input the desired time for the load to switch ON.
  4. Установить время ВЫХОДА: Input the desired time for the load to switch OFF.
  5. Select Days: Choose the days of the week for the program to be active (e.g., Mon-Fri, Sat-Sun, or specific days).
  6. Сохранить программу: Confirm and save the program. Repeat for additional programs.

The programming resolution is 1 minute, allowing for precise control.

5.3. Impulse Programming

The device also supports impulse programming, where the relay briefly activates for a set duration.

  1. Войдите в режим программирования: Войдите в меню программирования.
  2. Select Impulse Program: Choose an impulse program slot.
  3. Set Impulse Time: Define the time when the impulse should occur.
  4. Set Impulse Duration: Specify how long the relay should remain active (e.g., 1-59 seconds).
  5. Select Days: Choose the days for the impulse program.
  6. Сохранить программу: Подтвердите и сохраните.

5.4. Ручное управление

The device typically includes a manual override function to temporarily switch the load ON or OFF independently of the programmed schedule. Consult the device's physical buttons or display menu for this function.

6. Техническое обслуживание

6.1. Уборка

To clean the device, gently wipe the exterior with a soft, dry cloth. Do not use abrasive cleaners, solvents, or spray liquids directly onto the device.

6.2. Battery Reserve

The Logik Micro DW features a rechargeable lithium battery that provides a power reserve of approximately 3 years. This reserve maintains the time and programmed settings during power outages. The relay will only switch in the presence of mains power.

  • Батарея встроенная и не подлежит замене пользователем.
  • Regular operation with mains power will keep the battery charged.

7. Поиск Неисправностей

ПроблемаВозможная причинаРешение
Дисплей пуст.Устройство не получает питание.Check the main circuit breaker and wiring connections (L and N terminals).
Программы не выполняются.Incorrect time/day setting; Programs not saved; Manual override active; Power outage.Verify current time and day. Re-enter and save programs. Check manual override status. Ensure continuous power supply.
Нагрузка не включается/выключается.Incorrect wiring of the load; Exceeded load capacity; Faulty load.Verify load wiring according to the diagram. Ensure load current does not exceed 16A. Test the load independently.
Time drifts or resets frequently.Low internal battery reserve.Ensure the device is continuously powered for several hours to allow the internal battery to recharge. If the issue persists after prolonged charging, the device may require service.

8. Технические характеристики

ОсобенностьДеталь
МодельВП888200
Источник питания230 V AC ± 10% (50/60 Hz)
Выход1 changeover relay (1 NO/NC contact)
Рейтинг контактов16 A at 250 V AC (cos(Φ)=1)
Количество программ20 программ включения/выключения
Разрешение программирования1 минута
Запас энергии3 years (rechargeable lithium battery)
Рабочая температура-10 °C to +50 °C
Температура хранения-10 °C to +60 °C
Степень защитыIP40
ОтображатьLCD (no backlight)
МонтажDIN rail (1 module)
Размеры (В x Ш x Г)88mm x 18mm x 60mm (approximate, based on diagram)

9. Гарантия и поддержка

VEMER products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the documentation provided with your purchase or visit the official VEMER webсайт.

For technical support, troubleshooting assistance beyond this manual, or service inquiries, please contact VEMER customer support through their official channels. Ensure you have your product model number (VP888200) and purchase details available when contacting support.

Official VEMER Webсайт: www.vemer.it

© 2023 VEMER. All rights reserved. Information in this manual is subject to change without notice.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.