MicroShift R9 Double 9-Speed Dual Control Levers Instruction Manual

Введение

This manual provides comprehensive instructions for the installation, operation, and maintenance of your MicroShift R9 Double 9-Speed Dual Control Levers. Please read this manual thoroughly before installation and use to ensure proper function and safety. These levers are designed for road bicycles equipped with a 2x9 speed drivetrain system.

Информация по безопасности

Always prioritize safety when working with bicycle components. Improper installation or adjustment can lead to serious injury or damage to your bicycle.

• Ensure all components are compatible with your bicycle's existing drivetrain and braking system.
• Для установки и регулировки используйте соответствующие инструменты.
• Tighten all bolts and fasteners to the manufacturer's specified torque settings. Over-tightening or under-tightening can cause component failure.
• After installation, test the shifting and braking functions thoroughly in a safe environment before riding.
• Regularly inspect your levers, cables, and housing for wear or damage. Replace worn components immediately.
• If you are unsure about any part of the installation or adjustment process, consult a professional bicycle mechanic.

Содержимое упаковки

Перед началом установки убедитесь, что все необходимые элементы находятся в упаковке.

• MicroShift R9 Double 9-Speed Dual Control Levers (Left and Right)
• Shift Cables
• Тормозные тросы
• Корпус кабеля

Настраивать

Follow these steps for proper installation of your dual control levers.

1. Крепление на руль:
   • Position the levers on your handlebars at a comfortable angle. Ensure the brake levers are easily accessible from both the hoods and the drops.
   • Secure the levers to the handlebars using the integrated clamp. Затяните clamp bolt gradually and evenly to the recommended torque specification (typically 6-8 Nm), ensuring the levers are firmly in place but can still be adjusted with firm pressure if needed for fine-tuning.
2. Установка троса тормоза:
   • Insert the brake cable head into the designated slot on the brake lever.
   • Route the brake cable through the lever body and then through the brake housing.
   • Connect the brake cable to your caliper or cantilever brake system, ensuring proper tension and alignment. Trim excess cable and install a cable end cap.
3. Установка троса переключения передач:
   • Shift the lever to its highest gear position (smallest cog for rear, largest chainring for front).
   • Insert the shift cable head into the designated slot on the shift mechanism within the lever.
   • Route the shift cable through the lever body and then through the shift housing.
   • Connect the shift cable to your front or rear derailleur. Adjust cable tension using the barrel adjuster on the lever or derailleur for precise shifting. Trim excess cable and install a cable end cap.
4. Handlebar Taping:
   • Once all cables are routed and adjusted, secure them to the handlebars with electrical tape.
   • Wrap your handlebars with bar tape, ensuring a smooth and comfortable grip over the levers and cables.

Операционная

The MicroShift R9 Dual Control Levers integrate both braking and shifting functions into a single unit. Familiarize yourself with the lever's operation before riding.

Переключение передач

• Upshifting (to a larger cog/chainring): Push the main brake lever inwards towards the center of the handlebar. This action will move the chain to a larger cog on the rear cassette or a larger chainring on the front.
• Downshifting (to a smaller cog/chainring): Push the smaller, inner lever inwards towards the center of the handlebar. This action will move the chain to a smaller cog on the rear cassette or a smaller chainring on the front.
• Ensure you are pedaling lightly when shifting to allow the chain to move smoothly between gears.

Торможение

• To apply the brakes, pull the main brake lever towards the handlebar. The amount of braking force is proportional to how firmly you pull the lever.
• Always apply both front and rear brakes simultaneously for controlled stopping. Avoid sudden, hard braking with only the front brake, especially at high speeds, as this can cause loss of control.

Обслуживание

Regular maintenance ensures optimal performance and extends the lifespan of your MicroShift R9 levers.

• Уборка: Keep the levers clean from dirt and grime. Use a mild soap and water solution and a soft cloth. Avoid high-pressure washing directly on the levers.
• Проверка кабеля: Periodically check shift and brake cables for fraying, rust, or kinks. Replace cables and housing if any damage is observed or if shifting/braking performance degrades.
• Смазка: Apply a small amount of bicycle-specific lubricant to the pivot points of the levers and where cables enter the housing. Avoid over-lubrication, which can attract dirt.
• Корректирование: Regularly check and adjust brake and shift cable tension to maintain precise operation. Barrel adjusters on the levers or derailleurs can be used for minor adjustments.
• Проверка крепежа: Ensure all mounting bolts for the levers are securely tightened to the recommended torque specifications.

Поиск неисправностей

Вот некоторые распространенные проблемы и их возможные решения.

• Низкая эффективность переключения передач:
  • симптом: Gears skip or do not shift smoothly.
    Решение: Check cable tension. Adjust the barrel adjuster on the lever or derailleur. Turn clockwise to loosen tension (for slow upshifts) or counter-clockwise to increase tension (for slow downshifts). Inspect cables and housing for friction or damage. Ensure derailleurs are properly aligned.
• Spongy Brake Lever Feel:
  • симптом: Brake lever feels soft or requires excessive pull to engage.
    Решение: Check brake cable tension. Ensure brake calipers are properly adjusted and pads are not excessively worn. Inspect brake cables and housing for damage or compression.
• Lever Not Returning to Original Position:
  • симптом: Shift or brake lever sticks or does not spring back fully.
    Решение: Clean and lubricate the lever's pivot points. Check for any obstructions or debris. Inspect cables and housing for excessive friction or damage.

Технические характеристики

Гарантия и поддержка

For warranty information and technical support, please refer to the official microSHIFT website or contact your authorized microSHIFT dealer. Keep your proof of purchase for any warranty claims.