1. Продукт закончилсяview
The BriskHeat DHCS13 is a standard heavy-duty drum heater designed for metal drums and pails, specifically fitting 30-gallon (114L) containers. This heater provides efficient and uniform heating for various materials, utilizing a robust construction for durability and safety.
Its design incorporates a patented 360-degree grounded multi-stranded heating element, laminated between two extra-thick layers of 20mil fiberglass-reinforced silicone rubber. This construction ensures excellent strength, durability, and uniform heat distribution, meeting NEC 427.23 standards. The unit is moisture and chemical resistant and features an adjustable thermostat for precise temperature control.
Image 1.1: The BriskHeat DHCS13 drum heater shown installed on a black 30-gallon metal drum. The orange heating bands are visible wrapped around the drum, secured by spring closures.
2. Информация по технике безопасности
Внимательно прочтите все инструкции перед установкой и эксплуатацией. Несоблюдение этих инструкций может привести к повреждению имущества, серьезным травмам или смерти.
- Ensure the heater is used only on metal drums and pails as specified. Do not use on plastic drums.
- Убедитесь, что источник питания имеет напряжениеtage matches the heater's requirements (120VAC).
- Always ensure the heater is properly grounded. The unit includes a standard 3-prong plug (NEMA 5-15) for this purpose.
- Do not operate the heater in explosive atmospheres or near flammable vapors unless specifically rated for such environments. This heater is not intrinsically safe.
- Avoid direct contact with the heating surface during operation, as temperatures can reach up to 450°F (232°C).
- Do not immerse the heater in liquid. It is moisture and chemical resistant, but not submersible.
- Перед выполнением любого обслуживания или регулировки отключите питание.
- Держите шнур питания подальше от горячих поверхностей и острых краев.
- Do not modify the heater or its components. Use only genuine BriskHeat replacement parts if necessary.
3. Распаковка и содержимое
Carefully unpack the BriskHeat DHCS13 drum heater from its packaging. Inspect the unit for any signs of shipping damage. If damage is observed, do not proceed with installation and contact your supplier immediately.
Содержимое упаковки:
- BriskHeat DHCS13 Drum Heater (1 unit)
4. Настройка и установка
The DHCS13 drum heater is designed for easy installation on 30-gallon metal drums.
- Подготовьте барабан: Ensure the metal drum is clean and free from any debris or flammable residues on its exterior surface where the heater will be applied.
- Расположите обогреватель: Wrap the DHCS13 drum heater around the circumference of the 30-gallon metal drum. Position it at the desired height, typically around the lower or middle section of the drum, depending on the material to be heated.
- Надежно закрепите обогреватель: The heater features a spring closure mechanism. Expand the spring closure as needed (up to 3 inches / 76mm) to securely fasten the heater around the drum. Ensure the heater fits snugly against the drum surface for optimal heat transfer.
- Подключите питание: Plug the 6ft (1.8m) long power cord with its standard 3-prong plug (NEMA 5-15) into a properly grounded 120VAC electrical outlet. Ensure the outlet is capable of supplying 1000 watts.
- Первоначальная проверка: Before setting the temperature, ensure the heater is firmly attached and the power cord is not pinched or in contact with any hot surfaces.
5. Инструкция по эксплуатации
The DHCS13 drum heater is equipped with an adjustable thermostat for precise temperature control.
- Отрегулируйте термостат: Locate the adjustable thermostat dial on the heater. The thermostat has a temperature range of 50°F to 425°F (10°C to 218°C).
- Установите желаемую температуру: Rotate the dial to set the desired temperature for the contents of the drum. Start with a lower setting and gradually increase if higher temperatures are required.
- Подогрев монитора: The heater will begin to warm the drum. The thermostat will cycle the heating element on and off to maintain the set temperature.
- Защита от перегрева: The maximum exposure temperature on the heating surface is 450°F (232°C). The thermostat will prevent the surface from exceeding this temperature.
- Выключение: To turn off the heater, unplug it from the power outlet.
Примечание: The actual temperature of the drum contents may vary based on ambient temperature, drum material, and the specific properties of the material being heated. It is recommended to monitor the internal temperature of the drum contents, especially for temperature-sensitive materials.
6. Техническое обслуживание
Regular maintenance ensures the longevity and safe operation of your BriskHeat DHCS13 drum heater.
- Уборка: Disconnect the heater from power before cleaning. Use a damp cloth to wipe down the exterior of the heater. Do not use abrasive cleaners or solvents that could damage the silicone rubber.
- Инспекция: Periodically inspect the heater for any signs of wear, damage, or fraying of the power cord. Check the integrity of the silicone rubber and the spring closure mechanism.
- Хранилище: When not in use, store the heater in a clean, dry place, away from direct sunlight and extreme temperatures.
- Ремонт: Do not attempt to repair damaged components yourself. Contact BriskHeat customer support or a qualified technician for repairs.
7. Поиск Неисправностей
If you encounter issues with your DHCS13 drum heater, refer to the following common troubleshooting steps:
| Проблема | Возможная причина | Решение |
|---|---|---|
| Heater not warming up. | На блок не подается питание. Термостат установлен слишком низко. Неисправная розетка. | Check if the heater is plugged in. Увеличьте настройку термостата. Проверьте розетку с помощью другого устройства или попробуйте другую розетку. |
| Нагреватель не достигает желаемой температуры. | Термостат установлен слишком низко. Drum contents too cold or large volume. Poor contact with drum surface. | Увеличьте настройку термостата. Allow more time for heating, or consider additional insulation for the drum. Ensure the heater is snugly secured around the drum. |
| Отопитель часто включается и выключается. | Normal operation (thermostat maintaining temperature). Thermostat sensor issue. | This is typically normal. If cycling is excessive or erratic, contact support. |
| Visible damage to heater or cord. | Физический ущерб. | Immediately disconnect power. Do not use. Contact BriskHeat for repair or replacement. |
If the problem persists after attempting these solutions, please contact BriskHeat customer support.
8. Технические характеристики
| Атрибут | Ценить |
|---|---|
| Номер модели | DHCS13 |
| Емкость барабана | 30-Gallon (114L) Metal Drums |
| Томtage | 120 В переменного тока |
| Ваттс | 1000 Вт |
| Диапазон температур термостата | от 50°F до 425°F (от 10°C до 218°C) |
| Maximum Exposure Temperature (Heating Surface) | 450°F (232°C) |
| Материал | 2-Layer Fiberglass Reinforced Silicone Rubber |
| Диэлектрическая прочность | 2000В |
| Размеры (Ш x Д) | 4 дюйма (102 мм) x 58.5 дюйма (1496 мм) |
| Diameter (for drum) | 18.6 дюйма (473 мм) |
| Длина шнура питания | 6 футов (1.8 м) |
| Тип вилки | Standard 3-prong (NEMA 5-15) |
| Заземление | Заземленный |
9. Гарантия и поддержка
BriskHeat products are manufactured to the highest quality standards. For information regarding product warranty, please refer to the warranty statement provided with your purchase or visit the official BriskHeat webсайт.
For technical assistance, troubleshooting beyond this manual, or to inquire about replacement parts, please contact BriskHeat customer support:
- Производитель: BriskHeat
- Контактная информация: Refer to the BriskHeat webсайт или упаковку продукта для получения актуальной контактной информации.