DigiTech HT-6

DigiTech HardWire HT-6 Polyphonic Tuner

Руководство пользователя

Model: HT-6 | Brand: DigiTech

Введение

The DigiTech HardWire HT-6 Polyphonic Tuner is a robust and accurate pedal designed for guitarists and bassists. It offers polyphonic tuning, allowing you to check the tuning of all six strings simultaneously, as well as precise single-string chromatic tuning. Built with durable construction, the HT-6 provides reliable performance for various tuning needs, including standard, Drop D, and bass tuning modes.

DigiTech HardWire HT-6 Polyphonic Tuner pedal, showing its robust metal casing and LED display.

Image: The DigiTech HardWire HT-6 Polyphonic Tuner. This image displays the front view of the pedal, highlighting its sturdy metal construction and the bright LED display designed for clear tuning indication.

Настраивать

  1. Подключение питания: The HT-6 can be powered by a 9V battery or an external 9V DC power supply (not included).
    • To install a 9V battery, unscrew the four screws on the bottom plate and insert the battery, ensuring correct polarity.
    • For external power, connect a standard 9V DC power adapter to the "POWER" input jack. The pedal also features a 9V DC output for powering other pedals in a daisy chain.
  2. Аудио соединения:
    • Connect your instrument (guitar or bass) to the "INPUT" jack using a standard 1/4-inch instrument cable.
    • Connect the "OUTPUT" jack to your ampусилитель или следующую педаль в вашей сигнальной цепи, используя еще один инструментальный кабель 1/4 дюйма.
  3. USB-подключение (опционально): A mini-USB port is available for firmware updates. Connect a mini-USB cable from the pedal to your computer if updates are required.
Сторона view of DigiTech HardWire HT-6 pedal showing input, output, and power jacks.

Изображение: сбоку view of the DigiTech HardWire HT-6. This image illustrates the various connection ports, including the 1/4-inch input and output jacks, and the power input, essential for proper setup.

Инструкция по эксплуатации

Включение/выключение питания

The HT-6 is a true bypass pedal. When the pedal is off (bypassed), your instrument's signal passes directly through without any processing. To engage the tuner, press the footswitch. The LED display will illuminate, and your signal will be muted, allowing for silent tuning.

Режимы настройки

The HT-6 offers several tuning modes, indicated by LEDs on the pedal:

  • Polyphonic Mode: Strum all six strings simultaneously. The pedal will display the tuning status for each string using 15 bright LEDs per string. Green LEDs indicate in-tune, while red/orange LEDs indicate sharp or flat. This mode allows for quick identification of out-of-tune strings.
  • Chromatic (Single String) Mode: Play a single string. The display will switch to a precise chromatic tuner for that string, showing whether it is sharp, flat, or in tune. This mode is ideal for fine-tuning individual strings.
  • Drop D Tuning: The pedal supports Drop D tuning for guitars. Refer to the pedal's specific controls (if any, usually a button or switch) to select this mode.
  • Настройка бас-гитары: The HT-6 is compatible with 4, 5, and 6-string basses. Select the appropriate bass tuning mode for accurate bass guitar tuning.

Процесс настройки

  1. Engage the tuner by pressing the footswitch. Your signal will be muted.
  2. For a quick check, strum all strings. Observe the LED display to see which strings are out of tune.
  3. Adjust each out-of-tune string individually. Play the string, and the display will guide you to the correct pitch. Aim for the central green LED.
  4. Once all strings are in tune, press the footswitch again to bypass the tuner and unmute your signal.

Обслуживание

  • Уборка: Для очистки внешней поверхности педали используйте мягкую сухую ткань. Избегайте абразивных чистящих средств или растворителей.
  • Замена батареи: If using battery power, replace the 9V battery when the display dims or the pedal stops functioning correctly. Always dispose of used batteries responsibly.
  • Хранилище: Храните педаль в сухом месте, вдали от экстремальных температур и прямых солнечных лучей. Отключайте педаль от сети, если не используете её в течение длительного времени.
  • Обновления прошивки: Periodically check the DigiTech website for any available firmware updates for your HT-6 pedal. Updates can be installed via the USB port.

Поиск неисправностей

Проблема Возможная причина Решение
Педаль не включается. Dead battery or power adapter issue. Replace 9V battery or check power adapter connection and functionality. Ensure correct polarity if using a non-DigiTech adapter.
No signal output when pedal is engaged. This is normal behavior for tuning mode (signal is muted). Incorrect cable connection. Ensure the pedal is in bypass mode for signal pass-through. Check all instrument cable connections.
Неточные показания настройки. Poor instrument intonation, noisy signal, or incorrect tuning mode selected. Ensure your instrument's intonation is set correctly. Use high-quality cables. Select the appropriate tuning mode (e.g., single string for precise adjustments). Avoid playing other notes or strings while tuning.
Polyphonic mode not displaying all strings correctly. Unclear strumming or excessive noise. Strum all strings clearly and evenly. Ensure no other sounds are interfering with the signal.

Технические характеристики

  • Модель: HT-6
  • Тип: Polyphonic Chromatic Tuner Pedal
  • Отображать: 15 bright LEDs per string
  • Режимы настройки: Polyphonic, Chromatic (Single String), Standard, Drop D, Bass (4/5/6 string)
  • Обход: Истинный обход
  • Вход: 1/4-inch Instrument Jack
  • Выход: 1/4-inch Instrument Jack
  • Потребляемая мощность: 9V DC (external power supply or 9V battery)
  • Выходная мощность: 9V DC (for daisy-chaining other pedals)
  • Дополнительные возможности подключения: Mini-USB for firmware updates
  • Размеры (Д x Ш x В): Примерно 5.5 х 3.5 х 2.25 дюйма (13.97 х 8.89 х 5.72 см)
  • Масса: Примерно 1.38 фунта (0.62 кг)
  • Цвет: Черный/Серебристый

Информация о гарантии

DigiTech products are designed for reliability. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official DigiTech webСохраните чек о покупке для предъявления гарантийных претензий.

Поддержка клиентов

For technical assistance, product inquiries, or service, please visit the official DigiTech support website or contact their customer service department. Contact information can typically be found on the DigiTech webсайте или в упаковке продукта.

© 2023 DigiTech. Все права защищены.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.