Bolton Furniture Mission Twin Bed Instruction Manual

1. Введение

This manual provides detailed instructions for the assembly, usage, and maintenance of your Bolton Furniture Mission Twin Bed, Model 9921Y00. Please read this manual thoroughly before beginning assembly and retain it for future reference.

The Bolton Furniture Mission Twin Bed features solid frame construction and a honey finish, designed for durability and style. It includes a headboard, footboard, and a complete slat roll, eliminating the need for additional support.

Figure 1: Bolton Furniture Mission Twin Bed, Honey finish. This image displays the fully assembled twin bed with a headboard, footboard, side rails, and a mattress with bedding.

2. Информация по технике безопасности

• Always assemble the bed on a soft, clean surface to prevent scratching.
• Ensure all hardware is securely tightened before use. Periodically check and retighten hardware as needed.
• Не позволяйте детям играть на кровати или под ней во время сборки.
• Do not use power tools for assembly unless specifically instructed, as overtightening can damage components.
• Храните мелкие детали в недоступном для детей месте.
• This bed is designed for a standard twin-size mattress. Ensure the mattress fits properly to prevent gaps.

3. Содержимое упаковки

Before beginning assembly, verify that all components are present and undamaged. If any parts are missing or damaged, contact Bolton Furniture customer support.

• Изголовье (1)
• Подножка (1)
• Боковые ограждения (2)
• Slat Roll (1)
• Hardware Pack (Barrel Nuts, Bolts, Washers, Allen Wrench)

4. Настройка и сборка

Assembly of the Bolton Furniture Mission Twin Bed utilizes barrel nut and bolt metal-to-metal connections for a secure and durable structure. Two adults are recommended for assembly.

Необходимые инструменты (не входят в комплект):

• Phillips Head Screwdriver (for slat roll attachment, if applicable)

Этапы сборки:

1. Unpack all components and lay them out on a clean, soft surface to prevent damage. Identify the Headboard, Footboard, Side Rails, and Slat Roll.
2. Attach the Side Rails to the Headboard: Align the pre-drilled holes on the side rails with the corresponding holes on the headboard posts. Insert the barrel nuts into the designated holes on the side rails and secure them with the provided bolts using the Allen wrench. Do not fully tighten yet.
3. Attach the Side Rails to the Footboard: Repeat the process from Step 2 to attach the other end of the side rails to the footboard.
4. Tighten all Connections: Once all four connections (two on the headboard, two on the footboard) are made, carefully stand the bed frame upright. Systematically tighten all barrel nut and bolt connections until secure. Avoid overtightening.
5. Install the Slat Roll: Unroll the slat roll across the width of the bed frame, resting it on the support ledges of the side rails. The slats are pre-connected for easy installation. Secure the slat roll to the side rails using the provided screws and a Phillips head screwdriver, if applicable.

5. Использование

Once assembled, the Bolton Furniture Mission Twin Bed is ready for use. Place a standard twin-size mattress directly onto the slat roll. No box spring or additional foundation is necessary as the slat roll provides adequate support.

The bed is designed for general indoor use. Avoid placing excessive weight on any single point of the bed frame. The solid frame construction is built to last under normal usage conditions.

6. Техническое обслуживание

• Уборка: Протрите деревянные поверхности мягкой тряпкой.amp cloth. Avoid using harsh chemicals, abrasive cleaners, or polishes that may damage the honey finish.
• Проверка оборудования: Periodically (e.g., every 3-6 months) check all bolts and screws to ensure they remain tight. Retighten as necessary to maintain stability and prevent squeaking.
• Избегайте прямых солнечных лучей: Prolonged exposure to direct sunlight can cause the wood finish to fade or change color.
• Контроль влажности: Поддерживайте постоянный уровень влажности в помещении, чтобы предотвратить расширение или сжатие древесины, что может привести к трещинам или деформации.

7. Поиск Неисправностей

• Скрипы кровати:
  • Check all hardware connections and tighten any loose bolts.
  • Ensure the slat roll is properly seated and secured to the side rails.
• Кровать кажется неустойчивой:
  • Verify that all barrel nut and bolt connections are fully tightened.
  • Убедитесь, что кровать стоит на ровной поверхности.
• Детали отсутствуют или повреждены:
  • Do not proceed with assembly. Contact Bolton Furniture customer support immediately for replacement parts.

8. Технические характеристики

Figure 2: Dimensions of the Bolton Furniture Mission Twin Bed. The image shows the bed with measurements: 79 inches length, 43 inches width, and 39 inches height.

9. Гарантия и поддержка

Bolton Furniture stands behind the quality of its products. For specific warranty information, please refer to the documentation included with your purchase or visit the official Bolton Furniture website. For assistance with assembly, missing parts, or any other product-related inquiries, please contact Bolton Furniture customer support directly.

Контактную информацию обычно можно найти на сайте производителя. webсайте или на упаковочных материалах.