Продукт болееview
The Carl Zeiss Primo Star Microscope is a high-quality compound brightfield microscope designed for various scientific and educational applications. This model features Kohler halogen illumination, providing bright and even illumination for clear specimen viewing. It comes equipped with a set of objective lenses offering magnifications of 4x, 10x, 40x, and 100x, allowing for versatile observation. The stage is designed for right-hand operation, ensuring comfortable and precise sample manipulation. An additional pointer configuration is included for enhanced usability.
An image showing two Carl Zeiss Primo Star microscopes, highlighting their design and key components such as eyepieces, objective lenses, and stage.
Настраивать
- Распаковка: Осторожно извлеките микроскоп и все принадлежности из упаковки. Сохраните оригинальную упаковку для транспортировки или хранения в будущем.
- Размещение: Place the microscope on a stable, level surface away from direct sunlight, vibrations, and excessive dust. Ensure adequate ventilation around the instrument.
- Подключение питания: Connect the power cord to the microscope's power input and then to a suitable 110 Volt AC power outlet.
- Установка окуляра: Insert the eyepieces into the eyepiece tubes. Gently tighten any retaining screws if present.
- Объективная установка: Ensure the revolving nosepiece is rotated to an empty position. Carefully screw the objective lenses (4x, 10x, 40x, 100x) into the nosepiece in ascending order of magnification.
Инструкция по эксплуатации
- Включение питания: Turn on the main power switch, usually located at the base of the microscope.
- Регулировка освещенности: Adjust the brightness control knob to a comfortable level. For Kohler illumination, ensure the field diaphragm and aperture diaphragm are properly set for optimal contrast and resolution.
- Sample Размещение: Place your specimen slide on the mechanical stagе, закрепив его с помощью stage clips. Use the stage control knobs to center the area of interest over the light path.
- Фокусировка: Start with the lowest magnification objective (e.g., 4x). Use the coarse focus knob to bring the specimen into approximate focus, then use the fine focus knob for precise focusing.
- Magnification Change: Rotate the revolving nosepiece to select a higher magnification objective. Re-adjust the fine focus as needed. For the 100x objective, apply a drop of immersion oil to the slide before rotating the objective into place.
- Наблюдение: Look through the eyepieces and adjust the interpupillary distance and diopter settings for comfortable binocular viewинж.
Обслуживание
- Очистка линз: Use only specialized lens cleaning paper and lens cleaning solution. Gently wipe objective lenses and eyepieces to remove dust and smudges. Avoid touching optical surfaces with bare hands.
- Очистка кузова: Протрите корпус микроскопа мягкой тряпкой.amp ткань. Не используйте агрессивные химикаты или абразивные чистящие средства.
- Хранилище: When not in use, cover the microscope with a dust cover to protect it from dust and debris. Store in a dry, temperature-controlled environment.
- Замена лампы: If the halogen bulb burns out, ensure the microscope is unplugged and cool before attempting replacement. Refer to the specific instructions for bulb access and replacement.
- Регулярный осмотр: Periodically check all moving parts for smooth operation and ensure all screws are securely tightened.
Поиск неисправностей
| Проблема | Возможная причина | Решение |
|---|---|---|
| Нет освещения | Power cord disconnected, bulb burnt out, brightness knob at minimum. | Check power connection, replace bulb, increase brightness. |
| Изображение размыто/несфокусировано | Incorrect focus adjustment, objective not fully engaged, dirty lens. | Adjust fine focus, rotate objective until it clicks into place, clean lenses. |
| Темные пятна на поле зрения view | Dust on eyepiece or objective lens, dirt on specimen slide. | Clean eyepieces/objectives, clean specimen slide. |
| Неравномерное освещение | Improper Kohler illumination setup, condenser not centered. | Re-adjust field and aperture diaphragms, center condenser. |
Технические характеристики
| Особенность | Деталь |
|---|---|
| Производитель | Карл Цейсс |
| Номер модели продукта | Примо Стар |
| Номер детали | 415500-0010-001 |
| Размеры продукта | 28.8 x 18.6 x 39.7 см; 0.28 г |
| ASIN | B001W2UHTY |
| Тип источника света | Галоген |
| Реальный угол View | 30 градусов |
| Максимальное увеличение | 100 Х |
| Томtage | 110 Вольт |
| Описание объектива | Ахроматический |
| Источник питания | Источник постоянного тока |
| СКП | 694426400249 |
| First Available on Amazon.com.mx | 13 января 2016 г. |
Гарантия и поддержка
Carl Zeiss products are manufactured to high standards and are typically covered by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation included with your purchase or visit the official Carl Zeiss website. For technical support, service, or spare parts, please contact Carl Zeiss customer service or an authorized service center. Keep your purchase receipt and product serial number handy when seeking support.