Введение
Thank you for choosing the Beka T&T Exacto Timer with Thermometer. This device is designed to assist you in precise cooking by monitoring temperatures and timing processes. It features a durable stainless steel construction and a clear LCD display. Please read this manual carefully before using the product to ensure proper operation and longevity.

Image of the Beka T&T Exacto Timer with Thermometer, showing its stainless steel body and digital display.
Настраивать
- Установка аккумулятора: Locate the battery compartment on the back of the unit. Insert the required batteries (not included) according to the polarity indicators (+/-). Close the compartment securely.
- Подключение зонда: Connect the stainless steel temperature probe cable into the designated port on the side or back of the main unit. Ensure a firm connection.
- Первоначальное размещение: Place the main unit on a stable surface or use its integrated stand/magnet (if available) for convenient viewing. Ensure the probe cable is not kinked or exposed to direct heat sources beyond its intended use.
Инструкция по эксплуатации
The Beka T&T Exacto Timer with Thermometer offers both temperature monitoring and timing functions.
Измерение температуры
- Включение питания: The device typically powers on automatically once batteries are installed and the probe is connected. Note that this model may not feature a dedicated power switch; to turn off, the battery may need to be removed.
- Выбор единицы: Use the “°C/°F” button to switch between Celsius and Fahrenheit temperature readings.
- Вставка зонда: Carefully insert the stainless steel probe into the center of the food item you wish to measure, avoiding bones or fat. For liquids, ensure the probe tip is fully submerged.
- Показания температуры: The current temperature will be displayed on the LCD screen. The device can measure temperatures up to 250 °C (482 °F).
Функция таймера
- Установка таймера: Use the “MIN” and “SEC” buttons to set the desired countdown time. The timer can be programmed up to 99 minutes and 59 seconds.
- Запуск таймера: Нажмите кнопку «СТАРТ/СТОП», чтобы начать обратный отсчет.
- Приостановка/Возобновление: Press “START/STOP” again to pause or resume the timer.
- Сброс таймера: To reset the timer, press and hold the “MIN” and “SEC” buttons simultaneously, or press the “CLEAR” button if available.
- Тревога: An audible alarm will sound when the countdown reaches zero. Press any button to silence the alarm.
Обслуживание
- Уборка: Протрите основной блок мягкой, damp cloth. Do not immerse the main unit in water. The stainless steel probe can be cleaned with warm, soapy water. Ensure the probe is completely dry before storage.
- Хранилище: Store the timer and probe in a clean, dry place when not in use. Avoid extreme temperatures and humidity.
- Замена батареи: Replace batteries when the display becomes dim or the device stops functioning correctly. Always use the recommended battery type.
Поиск неисправностей
- Нет изображения/устройство не включается:
- Проверьте установку батареи и убедитесь в правильности полярности.
- Замените старые или разряженные батареи новыми.
- Ensure the probe is securely connected.
- Неточные показания температуры:
- Ensure the probe tip is fully inserted into the center of the food item and not touching bone or the bottom of a pan.
- Verify the probe cable is not damaged.
- Test the thermometer in boiling water (100 °C / 212 °F at sea level) or ice water (0 °C / 32 °F) to check calibration. If readings are consistently off, the probe or unit may require replacement.
- Таймер не работает:
- Убедитесь, что батареи новые и правильно установлены.
- Check that the time is set correctly before starting the countdown.
Технические характеристики
| Номер модели | 16303094 |
| Бренд | Beka |
| Размеры (Д x Ш x В) | 18.7 x 9 x 2.8 см (7.36 x 3.54 x 1.1 дюймов) |
| Масса | 117.93 г (0.26 фунта) |
| Внешний материал | Нержавеющая сталь |
| Тип дисплея | ЖК-дисплей |
| Диапазон температур | До 250 ° C (482 ° F) |
| Диапазон таймера | До 99 минут |
| Источник питания | Работает от батареи |
| Включенные компоненты | Температурный зонд |
| Специальная характеристика | Функция таймера |
Гарантия и поддержка
For warranty information and customer support, please refer to the documentation provided at the time of purchase or contact your retailer. You may also visit the official Beka webсайт для получения дальнейшей помощи.





