Введение
This manual provides essential instructions for the safe installation, operation, and maintenance of your APC AP7922 32A 230V Switched Rack PDU. The AP7922 is a rack-mountable power distribution unit designed to provide advanced power control and monitoring capabilities for IT equipment in data centers and server rooms. It features AC 230V input, Ethernet 10/100 connectivity, and 16 output connectors, all within a 2U, 19-inch form factor.
Важная информация по безопасности
Please read and understand all safety instructions before installing or operating this equipment. Failure to follow these instructions could result in electric shock, fire, or serious injury.
- Данное устройство предназначено только для использования внутри помещений.
- Connect the PDU to a properly grounded power source.
- Do not attempt to open or service the PDU. Refer all servicing to qualified personnel.
- Ensure the total current draw of connected equipment does not exceed the PDU's maximum current rating (32 Ampс).
- Перед выполнением любых работ по техническому обслуживанию или установке отключите питание.
Содержимое упаковки
При распаковке убедитесь в наличии всех предметов:
- APC AP7922 Switched Rack PDU
- Руководство по установке
- Кронштейны для монтажа в стойку
- Serial configuration cable
- Компакт-диск с документацией
Характеристики продукта
The APC AP7922 Switched Rack PDU offers the following key features:
- Коммутируемые розетки: Remotely control power to individual outlets for power cycling, delayed sequencing, and load shedding.
- Управление сетью: Full-featured network management interface via Ethernet 10/100 for remote monitoring and control.
- Текущий мониторинг: Monitor the aggregate current draw per PDU to prevent circuit overloads.
- Конструкция для монтажа в стойку: Occupies 2U of rack space, compatible with standard 19-inch racks.
- Выходные разъемы: Equipped with 16 C13 output connectors.
- Vol входtage: Supports AC 230V input.
Изображение: Спереди view of the APC AP7922 Switched Rack PDU, showing the 16 C13 outlets and network interface.
Инструкции по установке
1. Монтаж в стойку
- Identify two available 2U spaces in your standard 19-inch equipment rack.
- Attach the provided rack-mounting brackets to the PDU using the screws supplied.
- Secure the PDU into the rack using appropriate rack screws. Ensure it is firmly seated and level.
2. Подключение питания
- Connect the PDU's input power cord to a dedicated 230V, 32A power source. Ensure the power source is properly grounded.
- Do not overload the circuit. Verify that the total load of connected devices will not exceed 32 Amps.
3. Сетевое подключение
- Connect a standard Ethernet cable from the PDU's network port to your network switch or router.
- The PDU will obtain an IP address via DHCP by default. Refer to the full user manual for static IP configuration.
Инструкция по эксплуатации
Powering On/Off Connected Devices
Once the PDU is powered and connected to the network, you can manage its outlets remotely.
- Access the PDU's web интерфейс, введя его IP-адрес в web браузер.
- Log in using the default credentials (refer to the full manual for details).
- Navigate to the outlet control section. From here, you can individually switch on, switch off, or cycle power to each of the 16 C13 outlets.
Monitoring Current Draw
The web interface also provides real-time monitoring of the aggregate current draw. This allows you to ensure that the PDU and its connected circuit are not overloaded.
Обслуживание
- Уборка: Periodically clean the exterior of the PDU with a soft, dry cloth. Do not use liquid cleaners or solvents.
- Обновления прошивки: Проверьте БТР website for available firmware updates to ensure optimal performance and security. Follow the instructions provided with the firmware package for safe updating.
- Управление кабелями: Ensure all power and network cables are neatly routed and secured to prevent accidental disconnections or damage.
Поиск неисправностей
| Проблема | Возможная причина | Решение |
|---|---|---|
| Блок распределения питания не включается. | No input power; tripped circuit breaker. | Verify the power cord is securely connected. Check the building's circuit breaker for the PDU's power source. |
| Невозможно получить доступ web интерфейс. | Incorrect IP address; network connectivity issue; PDU not powered. | Ensure the PDU is powered on. Verify network cable connection. Confirm the correct IP address. Check network settings. |
| Outlets do not switch. | Software issue; PDU fault. | Try restarting the PDU. If the issue persists, contact technical support. |
| Сигнализация перегрузки. | Total current draw exceeds PDU rating. | Disconnect non-essential equipment to reduce the load. Redistribute equipment across multiple PDUs if necessary. |
Технические характеристики
| Особенность | Деталь |
|---|---|
| Номер модели | AP7922 |
| Бренд | APC от Schneider Electric |
| Форм-фактор | 2U Rack-mountable, 19-inch |
| Vol входtage | 230 В переменного тока |
| Входной ток | 32 Amps |
| Выход Voltage | 230 В переменного тока |
| Выходной ток | 32 Ampс (макс.) |
| Количество розеток | 16 |
| Тип разъема | С13 |
| Сетевой интерфейс | Ethernet 10/100 |
| Ватtage | 7360 Вт |
| Размеры (В x Ш x Г) | 4.49 x 17.52 x 3.5 дюйма |
| Масса | 0.7 Килограмма |
| Материал | Металл |
| Цвет | Черный |
Гарантия и поддержка
Информация о гарантии
На продукцию APC обычно распространяется стандартная гарантия производителя. Пожалуйста, ознакомьтесь с гарантийным талоном, прилагаемым к вашему изделию, или посетите официальный сайт APC. website for detailed warranty terms and conditions specific to the AP7922 model.
Техническая поддержка
For technical assistance, troubleshooting, or to report issues, please contact APC customer support. You can find contact information and additional resources on the official Schneider Electric webсайт: