Behringer DJX400

Введение

This instruction manual provides comprehensive guidance for the Behringer DJX400 2-channel DJ Mixer. It covers essential information regarding product setup, operational procedures, maintenance, and troubleshooting. Familiarize yourself with this manual to ensure optimal performance and longevity of your DJX400 mixer.

Передний view of the Behringer DJX400 DJ Mixer, showing its two channels, faders, EQ controls, crossfader, and master section.

Настраивать

Follow these steps to properly set up your DJX400 mixer.

1. Распаковка и осмотр

• Осторожно извлеките миксер из упаковки.
• Осмотрите устройство на наличие повреждений, которые могли возникнуть во время транспортировки. При обнаружении повреждений немедленно свяжитесь с вашим дилером.
• Ensure all accessories, including the power cable, are present.

2. Подключение источников звука

The DJX400 features two dual-input stereo channels. Each channel can accept either PHONO (turntable) or LINE (CD player, media player) level signals.

• PHONO Inputs (RCA): Connect turntables to the PHONO inputs. Ensure your turntables have a ground wire connected to the mixer's ground terminal (if available) to reduce hum.
• LINE Inputs (RCA): Connect CD players, media players, or other line-level audio devices to the LINE inputs.
• MIC Input (1/4" TRS): Connect a microphone to the 1/4" TRS input on the front panel.

3. Подключение аудиовыходов

• MASTER Output (RCA): Connect this output to your main PA system or amplifier. This is your primary audio output.
• BOOTH Output (RCA): Connect this output to a monitor speaker system in your DJ booth. This allows you to hear your mix independently of the main output.
• Выход REC (RCA): Connect this output to a recording device (e.g., a digital recorder, computer audio interface) to capture your mix.
• HEADPHONE Output (1/4" TRS): Connect your headphones to this jack for monitoring.

4. Подключение питания

• Убедитесь, что выключатель питания микшера находится в положении ВЫКЛ.
• Connect the provided power cable to the mixer's power inlet and then to a suitable AC power outlet.
• Power on your audio sources and amplifiers before turning on the mixer.
• Finally, switch the DJX400 power ON.

Операционная

This section details the functions of the DJX400's controls and how to operate the mixer.

1. Регуляторы каналов

Each of the two stereo channels features the following controls:

• INPUT SELECT Switch: Toggles between PHONO and LINE inputs for the respective channel.
• Взять под контроль: Adjusts the input sensitivity for the channel. Set this so the channel's peak LED occasionally flashes, but does not stay lit.
• 3-Band KILL EQ: Provides -32 dB attenuation for HIGH, MID, and LOW frequencies. Use these to sculpt the sound of each track.
• CHANNEL FADER: Controls the volume level of the individual channel.
• Кнопка PFL (Pre Fader Listen): Routes the channel's audio to the headphone output for monitoring before it reaches the main mix.

2. Кроссфейдер

The DJX400 features a super-smooth dual-rail "Ultraglide" crossfader designed for up to 500,000 life cycles.

• КРОССФЕЙДЕР: Blends between Channel 1 and Channel 2. Moving it to the left emphasizes Channel 1, and to the right emphasizes Channel 2.
• CROSSFADER CURVE Control: Adjusts the response curve of the crossfader. A sharp curve is ideal for scratching, while a smooth curve is better for blending.

3. Мастер-секция

• МАСТЕРСКИЙ УРОВЕНЬ: Controls the overall output volume of the mixer to the main PA system.
• УРОВЕНЬ СТЕНДА: Adjusts the volume of the BOOTH output for your monitor speakers.
• УРОВЕНЬ МИКРОФОНА: Controls the volume of the microphone input.
• XPQ 3D SURROUND: Activates and adjusts the XPQ 3D surround effect, which widens the stereo image and adds transparency to the sound. Turn the knob to increase the effect.

4. Headphone Section

• УРОВЕНЬ НАУШНИКОВ: Регулирует громкость выхода наушников.
• PFL/MAIN MIX Control: Blends between the PFL (pre-fader listen) signal and the main mix in your headphones.
• SPLIT/STEREO Switch: In SPLIT mode, the PFL signal is sent to one ear and the main mix to the other. In STEREO mode, both signals are mixed in stereo.

5. BPM Counter

The intelligent dual auto-BPM counter displays the beats per minute for both channels, aiding in beatmatching.

• The display shows the BPM for the active channel or the channel selected for PFL.
• Use the BPM display to visually match the tempo of two tracks before crossfading.

Обслуживание

Proper maintenance ensures the longevity and reliable operation of your DJX400 mixer.

Уборка

• Always disconnect the mixer from power before cleaning.
• Для протирки наружных поверхностей используйте мягкую, сухую, безворсовую ткань.
• Для стойких загрязнений слегкаamp Можно использовать ткань, смоченную мягким мылом, а затем протереть сухой тканью.
• Avoid using abrasive cleaners, solvents, or chemical sprays, as these can damage the finish and internal components.
• Keep faders and knobs free from dust and debris. Compressed air can be used carefully to clear dust from crevices.

Хранилище

• Если миксер не используется, храните его в прохладном, сухом месте, вдали от прямых солнечных лучей и экстремальных температур.
• Protect the mixer from dust by covering it with a dust cover.

Поиск неисправностей

This section addresses common issues you might encounter with your DJX400 mixer.

Технические характеристики

Key technical specifications for the Behringer DJX400 DJ Mixer:

Гарантия и поддержка

Behringer products are designed for reliability and performance. For detailed warranty information and technical support, please refer to the official Behringer webили обратитесь к местному авторизованному дилеру. Сохраните чек о покупке в качестве подтверждения покупки на случай предъявления гарантийных претензий.

• Онлайн поддержка: Посетите официальный сайт Behringer. webСайт с часто задаваемыми вопросами, загрузками программного обеспечения и ресурсами поддержки.
• Сервисные центры: Найдите авторизованные сервисные центры для ремонта и технического обслуживания.